Auto Enamel Black

This is a slower drying automotive enamel with very good flow and gloss, excellent metal protection and adhesion to most surfaces. PRODUCT AND ADDITIVES Concept Auto Enamel Concept Enamel Thinner SUITABLE SUBSTRATES Concept Enamel Primer Concept Zinc Phosphate Primer Concept 1K Etch Primer Concept Universal 4000 Primer Sound Enamel surfaces. MIXING RATIO Up to 20% reduction with Concept Enamel Thinner may be required. SPRAY GUN AND PRESSURE SPRAY GUN & PRESSURE: 1.2 2.0 mm gravity or suction feed gun. Pressure at 300 400 kPa (Gravity feed is slightly higher pressure) TECHNICAL DATA SHEET AUTO ENAMEL Auto Enamel Page 2 of 2 APPLICATION All surfaces must be thoroughly sanded and cleaned with Concept Wax & Grease Remover prior to application. Apply two to three even coats. Avoid heavy wet coats. SPRAYING VISCOSITY: 17 19 seconds B4 cup at 25C. FLASH-OFF TIME: 5 minutes between coats at 25C. DRYING: 16 24 hours at 25C for a Dry Film Thickness of 40 50 Micron. TECHNICAL INFORMATIO